wpb4e0076f_0f.jpg
wpc4636dea.gif
Copyright 2016 Diktron Developments Ltd, Inc. All rights reserved.
wpd2d1306e_0f.jpg
wp42ad885d.png
Last Updated: 200/06/2016
wpf88ac5b1_0f.jpg
The Sound Of Safety
wp553e68a4_0f.jpg

The Wolf ATEX Safety Torch range offers the perfect answer for every Ex application, with reliable, simple and cost effective solutions. The range includes T4 and T6 models with straight or right-angle body style.

The ATEX Safety Torch is a reliable, simple and cost effective portable light and is available with a straight or right-angle body style and vacuum, halagon or xenon bulbs and is CE marked to the ATEX directive and IECEx certified for safe use in Zones 1 and 2 potentially explosive gas, vapour and mist atmosphere, where a T6 or T4 class permits, and Zones 21 and 22 dust atmospheres, with certified maximum surface temperatures of 65°C or 95°C.

 

T4 models give outstanding light output using advanced, long life halogen or xenon bulbs, set in a high quality parabolic reflector, coupled with alkaline cell approval, giving up to 12 hours of light output. The T4+ halogen models are fitted with a low power warning circuit, illuminating a red indicator when battery voltage is low. Alternatively T6 allows use in any Zone 1 or 2 atmospheres, with optimum light output in this temperature class, and a 5 hour duration.  

 

The compact torch design has a high-grip ergonomic form with easy single-handed switching, even with gloved hands. The torch body offers high strength, and proven impact resistance even at sub zero temperatures, using carefully selected thermoplastic resins with excellent chemical resistance. Additionally, the rubber armoured lens ring and end cap give enhanced grip and shock protection. The shatterproof polycarbonate lens has a scratch and chemical resistant coating.  

 

The torch is sealed dust tight and protected from water immersion, with a certified IP67 enclosure. Right angle models incorporate a replaceable high strength thermoplastic belt clip for hands free use. Both models allow straightforward battery and bulb replacement, a spare bulb is fitted in the bulbholder for quick and convenient replacement. All models are supplied with wrist straps and clip rings.  

 

TR & TS 24 range conform to:

ATEX

II 2 GD Ex e ib IIC T4 (Ta = 40/55°C) Gb   &  Ex tD A21 IP67 T95°C (Ta = 55°C) Db

IECEx:   

Ex e ib I/IIC T4 IP67/Ex tD A21 T95

The Wolf ATEX Safety Torch T4
wp9e70d2a9.gif
Part No. 6075
TR-24+
Right Angled Torch Body - Halogen Filled Filament Bulb - Low Power Indicator
Gas Zone: 1 and 2, Dust Zone: 21 and 2

Part No. 6017
TR-24
Right Angled Torch Body - Xenon Filled Filament Bulb
Gas Zone: 1 and 2, Dust Zone: 21 and 22


Part No. 6018
TS-24
Straight Torch Body - Xenon Filled Filament Bulb
Gas Zone: 1 and 2, Dust Zone: 21 and 22


Part No. 6019
TS-24+
Straight Torch Body - Halogen Filled Filament Bulb - Low Power Indicator
Gas Zone: 1 and 2, Dust Zone: 21 and 22
The TP-300 LED  torch module for T4 ATEX Torches retrofits into existing
TS/TR-24 and TS/TR-24+ safety torches.
wp2a8a46c2_0f.jpg
This LED module replacement significantly improves the light output from 17 lumens to approximately 70 lumens with an increase in battery output from 10 to 20 hours.

Replacing the existing bulb contact with the LED module is quick and easy and will preclude the need for bulb changes in the future and ensure an ultra bright light output.