wpb4e0076f_0f.jpg
wpc4636dea.gif
Copyright 2016 Diktron Developments Ltd, Inc. All rights reserved.
wpd2d1306e_0f.jpg
wp42ad885d.png
Last Updated: 200/06/2016
wpf88ac5b1_0f.jpg
The Sound Of Safety
wp8ec77c49_0f.jpg
wp867f5a71_0f.jpg
wp4ebbe70c_0f.jpg
wpc05699b8_0f.jpg

Rapid Deployment Boards

These Boards are for use when the need to rescue is considered to be urgent and requires no instructions for the BA wearer other than the need to insert his BA tally in the slot provided.

 

wpe83361fb_0f.jpg

Small  Board is for use when the need to rescue is considered to be urgent and requires no instructions for the B.A. wearer other than the need to insert his B.A. tally in the slot provided.
At a later time of entry the designated Entry Control Officer will use the information on the Rapid Deployment Board to transfer accountability of the B.A. wearers to the Standard 12 Slotted B.A. Board as follows:-
Remove tallies from Rapid deployment board the lapsed time will stop counting and remain visible. By subtracting the lapsed time reading from the present time shown on the 12 slotted Entry Control board, he then writes real entry time on tally and inserts it in the Entry Control Board. At this point he is able to enter Whistle time in the usual way with the use of the Calculator.
LED Indicator Lights
Green : Start-up, Push Buttons.
Left Button : Off Switch only (5 Sec delay to avoid accidental), Other Button : Illumination
The sounder is not an alarm and should only be considered as a tap on the shoulder to ECO. It sounds 5 bleeps every 5 minutes.

Various Slot Rapid Deployment B.A. Board.
The rapid deployment Entry control board comprises of a timing device and positions for the insertion of four B.A. tallies. When the switch is depressed by the insertion of the first tally, this automatically operates the timing device and the lapsed time is indicated on the Board. When both tallies are removed the lapsed time will stop and remain visible until the power button is pressed.

Procedure.
Upon arrival at the incident the B.A. Wearer removes the key and tally from DSX MKI or MKII Distress signal and places it in the slot provided in the B.A. Board. No further action is required by the B.A. Wearer, who is then able to enter the incident. The B.A. Board will then automatically monitor elapsed time. As more personnel become available and a full Entry Control is initiated, the B.A. Entry Control Officer transfers the information from the Rapid Deployment Board to the standard B.A. Board in the normal manner, hence maintaining Accountability.
 

Size 2 man 6084/2 = 175mm * 210mm * 30mm (W * H * D) weight = 670g

Size 4 man  6084/4 = 180mm * 310mm * 30mm (W * H * D) weight = 1006g

Size 5 man 6084/5 = 180mm * 365mm * 30mm (W * H * D) weight = 1128g
Part Number 6084 (4 man) for other tally key size’s use part number followed by /2, /3, /5 etc.

B.A boards are not supplied with Identification tally
 

 

12 Man Rapid Deployment Board        

 Part Number 6083/12 (12 man) for other tally key slot size’s use part number followed by /6, /8, /10 etc

 

 

Standard B.A Board with extra features, including Rapid Deployment Facility Procedure.The B.A Wearers remove Tally key from the DSX and place it in the slots provided in the B.A Board. No further action is required by the B.A wearer, who is then able to enter the incident. At some later moment of time when the B.A Entry Control has set up the B.A Board, say 10 minutes after B.A entry. He is able to enter details directly onto board simply by referring to the elapsed time, and the present time. e.g. If present time is 1:30 then time of entry would be 1:20 , he would then turn calculator to 1:20 , and then by reading the tally cylinder content, say 180 Bar he could then enter real time of whistle on the calculator.
Caution HARD WORK WILL REDUCE DURATION TIME.

Note! Refer to Technical Bulletin 1/1997 CNP3 Rapid Deployment Procedures.

B.A boards are not supplied with Identification tally.

S                              W     *   H       *    D                    Grams

6048/2 - Size = 390mm *   300mm * 25mm  Weight 1638.00g  

6048/4 - Size = 390mm *   400mm * 25mm  Weight 2143.00g

6048/6 - Size = 390mm *   500mm * 25mm  Weight 26670.00g

6048/8 - Size = 390mm *   600mm * 25mm  Weight 3160.00g

6048/10 - Size = 390mm * 690mm * 25mm  Weight 3632.00g

6048/12 - Size = 390mm * 790mm * 25mm  Weight 4218.00g

 

Made in any size, with logos and wording to your requirements

wp480a0aec_0f.jpg
wp787f5f5a_0f.jpg
wpd839ebf5_0f.jpg
ChinaGraph pencil (box of 12)
wp45d3c5d6_0f.jpg
wp8ca48e46_0f.jpg
wp3b6d1bb4_0f.jpg
wp9ab4ee16_0f.jpg
wp25335b24_0f.jpg
wp1181c7d8_0f.jpg
6 metre personal line
60 metre guide line
Thunderer Whistle
B.A Guide Line tally A & B
B.A Branch line tally set
Main control tabard
Clock Kit
wpadca6381.png
wpe12e9df6_0f.jpg
Diktron DSX MKII
6084
6084/2
6083
wp7f51ab55_0f.jpg

Photoluminescent

The Board provides a source of light in total darkness. Highly visible to the human eye in the dark after exposure to natural or artificial light. Gradual diminution of glow intensity over several hours. Rechargeable unlimited times by simple re-exposure to light.

Highly visible in darkness    -  Recharging  unlimited

Failsafe and maintenance free   -  Highly durable

Non-toxic   -  Non-radioactive

Lead and phosphorous free

 

wp7bb7b9dd.png
Part No.6084LT
wpaaa3bd3c_0f.jpg
NEW Holdall /Carry Bag
wp93639f5e_0f.jpg
B.A & Tripod
holdall
Alternative Languages
wpec440e22_0f.jpg
wp3d735671_0f.jpg
wp240ce168_0f.jpg
Swedish /  svensk
Russian / Русский язык
Arabic / عربي
Click on image for full size picture
wpadca6381.png
Alternative Languages
See Below
wpeb262a7c_0f.jpg
wp85110635_0f.jpg
wp55a37a06_0f.jpg
wp812f19f5_0f.jpg
wpe5a294a4_0f.jpg
wpe4c7ac68_0f.jpg
wp0cc80e59.jpg
B.A Board protective corners
Part No. 6089
4.0 grams each
Small Rapid deployment board
6092 retainers
Part No. 6088
5.0 grams pair
China graph pencil holder
Part No. 6090
7.0 grams
Large Rapid deployment Board 6092 Cover
Part No. 6091
77.0 grams
Replacement Rapid Deployment module
Part No. 6092
175.0 grams
wp68343b93.png